Bộ khuếch đại cảm biến mức Keyence FL-001

Amplifier Unit, Standard Specification
SKU: FL-001
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT

Mã sản phẩm:
FL-001
Lượt xem:
2928
Giá:
Liên hệ
Báo giá

Thông tin sản phẩm
Bình luận

Model			FL-001
Type			Standard (G3/4)
Measurement range			100 to 2,000 mm 3.94″ to 78.74″
Specific conductive capacity of measurable media			2 or more^*1
Resolution			1 mm 0.04″^*2
Linearity			±3 mm ±0.12″^*2
Temperature characteristics			0.1 mm/°C
Undetectable area	In the case of water	Top side	25 mm 0.98″
		Bottom side	10 mm 0.39″^*3
	In the case of oil	Top side	50 mm 1.97″
		Bottom side	30 mm 1.18″^*3
Judgment output response time			0.4 s minimum
Probe horizontal torque			6 N m
Tank pressure			-0.1 to +0.5 Mpa
Connection port			G3/4
Control output	Judgment output/alarm output		NPN/PNP open collector (selectable), 30 VDC max., 50 mA max. for each Residual voltage: 2 V max. for NPN, 2.5 V max. for PNP, N.O./N.C. switchable
	Analog output		4 to 20 mA, maximum load resistance: 350 Ω (Response time: 0.1 s after comparator output determined [90 % response]) Ripple when target remains stationary (P-P) 2 % of F.S. max.
Network compatibility			IO-Link^*4
Analog output accuracy	Resolution		1 mm 0.04″
	Zero accuracy		±0.1 mA (Zero point = 4 mA)
	Full scale accuracy		±0.2 mA (full scale = 20 mA)
Applicable cable			8-pin M12 connector
Rating	Power voltage		10 to 30 VDC, ripple (P-P) 10% included, Class 2 or LPS
	Current consumption		300 mA max. (at 10 V)/120 mA max. (at 30 V) (excluding load)
Environmental resistance	Enclosure rating		IP67
	Ambient temperature		-20 to +60 °C -4 to +140°F
	Relative humidity		35 to 85 % RH (No condensation)
	Operating medium temperature		-20 to +100 °C -4 to +212 °F
	Vibration resistance		10 to 55 Hz, 0.75 mm 0.03″ double amplitude in X, Y and Z directions, 2 hours respectively
	Shock resistance		300 m/s² in 6 directions, 3 times respectively
Material	Liquid end materials		Probe: SUS304 Housing bottom seal section: PTFE Packing: FKM (bottom of the shielded part)
	Case		Metal section of the housing: SUS304, SUS303 Plastic section of the housing: PBT, PAR, NBR, HNBR, PET
Weight			400 g
^1 These values were measured at the position of 100 mm 3.94″ or less from the wall of a metal tank. Contact KEYENCE for the case of a plastic tank. ^2 These values were measured under the following conditions. Medium: Water, Tank material: Metal, Linearity range: Between 6 cm 2.36″ from the top and 1 cm 0.39″ from the bottom, Average time: 4 s ^3 For the sanitary/plastic types, the undetectable area from the bottom end varies depending on the length of the probe. ^4 Compatible with IO-Link Specification V1.1/COM 2 (38.4 kbps).